How to maintain the power drill in long-term use?

Power head drilling rig (reverse circulation drilling rig) mid-term maintenance regulations

1. The maintenance time for diesel engines is 100 hours; every 250 hours thereafter. Replace the oil filter and oil.

2. The gear oil is changed every 500 hours; the gear oil in the large box is changed every 1,000 hours.

3.Hydraulic oil is filtered every 500 hours, replaced every 1500 hours, and every 2500 hours thereafter; (including replacement of filters when replacing).

Long-term maintenance regulations for power head drilling rigs (reverse circulation drilling rigs)

1. After one year of use, the equipment must be overhauled and maintained; the equipment should be cleaned, inspected, repaired, and replaced to eliminate abnormal phenomena and keep the machine intact and tidy;

2.Parking maintenance: maintenance performed when parking for more than one week, troubleshooting, and maintenance and lubrication of the entire car;

3. Storage and maintenance: during the storage period, check once a month, anti-corrosion the rusted parts, and maintain and lubricate the entire vehicle;

4. Run-in period: refers to the maintenance performed during the run-in period of the new machine after it leaves the factory and after overhaul, which is required to be performed in accordance with the maintenance regulations; it cannot be operated at full load during work, and should work under low and medium load;

5. Season change maintenance: Maintenance generally performed in the summer and winter, replacement of lubricating oil and antifreeze and cold and cooling measures.