National Service Hotline：
Power head drilling rig (reverse circulation drilling rig) mid-term maintenance regulations
1. The maintenance time for diesel engines is 100 hours; every 250 hours thereafter. Replace the oil filter and oil.
2. The gear oil is changed every 500 hours; the gear oil in the large box is changed every 1,000 hours.
3.Hydraulic oil is filtered every 500 hours, replaced every 1500 hours, and every 2500 hours thereafter; (including replacement of filters when replacing).
Long-term maintenance regulations for power head drilling rigs (reverse circulation drilling rigs)
1. After one year of use, the equipment must be overhauled and maintained; the equipment should be cleaned, inspected, repaired, and replaced to eliminate abnormal phenomena and keep the machine intact and tidy;
2.Parking maintenance: maintenance performed when parking for more than one week, troubleshooting, and maintenance and lubrication of the entire car;
3. Storage and maintenance: during the storage period, check once a month, anti-corrosion the rusted parts, and maintain and lubricate the entire vehicle;
4. Run-in period: refers to the maintenance performed during the run-in period of the new machine after it leaves the factory and after overhaul, which is required to be performed in accordance with the maintenance regulations; it cannot be operated at full load during work, and should work under low and medium load;
5. Season change maintenance: Maintenance generally performed in the summer and winter, replacement of lubricating oil and antifreeze and cold and cooling measures.
all rights reserved:Xinhe County Huagou Piling Driving Machinery factory
Address: Located at the 50 meters south of Tian Jiu Tai Ke Courtyard, south side of Chunqiu Road, West side of 308 National Road, Xinhe County, Xingtai City